RV Thixopoxy GLUE

RV Thixopoxy GLUE

After testing this glue was found to be very suitable for many difficult adhesive jobs that you encounter in rod building. A thixotropic solvent-free epoxy adhesive suitable for bonding cones, reel seats, grip materials, etc. Also suitable for bonding many materials such as wood, concrete, steel and various plastics.
Comes as a set in dose syringes - 10cc. hardener / 20cc. resin (30cc.) or 25cc. hardener / 50cc. resin (75 cc.)

Packaging includes

- 4 x large brush - 2 x stirring paddle - 1 x sealable mixing cup (mixing cup reusable after the residue has hardened).

Properties

- Mixing ratio resin (white) / hardener (red) - 2: 1 volume parts - easy and precise to dose with the dispensing syringes. Mix well and wait for a while before processing.
Application preferably between 18 and 25 ° C - when gluing on hardened surfaces, always degrease and sand with K80 / 120. Store in a cool, dry and frost-free place. The lower the temperature, the longer the curing time. This glue has filling properties, never add thinners. Hand-tight after 1.5 to 4 hours, full hardening approx. 10 hours. High strength when correct processed (degreasing / roughening).
- Total processing time depends on ambient temperature approx. 25 to 60 minutes at 18/25 ° C, more than enough time to carry out all the gluing work in a set in one gluing session.
- This adhesive has handy timeframes in viscosity, it can be easily applied during the first 10/15 minutes, for example with a brush (grip materials, top eyes, rings, etc.). The glue slowly thickens further and can then be processed finely for, for example, reel seats with a flexible spatula or stiff brush. The glue continues to sag slightly, which guarantees the connection of blank and reel seat. If you want a thicker glue for a particular job, simply mix the glue 15 to 20 minutes beforehand.
- Comes with Englisch prescription and explanation. Read rescription before use, keep out of reach of children.